Hiking Blake Peak
Blake Peak, while one of the shorter Adirondack High Peaks, is still a serious undertaking with significant elevation gain and mileage. A successful ascent of Blake requires research, prior experience hiking in the High Peaks, physical fitness, proper gear, and knowledge of Leave No Trace principles.
Key takeaways
- Elevation: 3,960 feet
- Elevation gain: 5,200 feet round trip
- Distance: 8.7 miles (17.5 miles round trip)
- Hike includes multiple water crossings, steep ladders, steep rocky sections, and trail junctions
- Based on the approach from Elk Lake
Hiking Blake Peak from Elk Lake
The approach described here is not the typical way to hike Blake. It involves more miles hiked and more elevation gain than the approach from the AMR. If you are looking for the most popular way up Blake, check out the approach from the AMR over Colvin.
The trail starts across from the parking area at the Elk Lake Trailhead, which leads to Panther Gorge and Mount Marcy. You will drop to cross The Branch before starting a flat approach to the beginning of a wet hike to the shoulder of Pinnacle Ridge, reahed at 3.5 miles. A couple more small ups and downs, then you drop slightly to the Pinnacle Ridge Trail on your right. From this point the trail is very demanding and encompasses several smaller peaks with no official names. After 6.6 total miles, you'll reach a spur trail that leads right to the summit of Pinnacle, which has some views of Elk Lake. Turning left at this junction marks the start of the bumpy ridge to Blake. If you have the option of a second car, and can leave it at the AMR trailhead, that is recommended as it saves you mileage and elevation gain. If you cannot do this, once the summit of Blake is reached at roughly 8.7 miles in (which is wooded), you will have to go back the way you came up.
Keep in mind, there is also no water along the Pinnacle Ridge. Being a long day, bring a water filter, and fill up before you start the serious ascent up Blake.
Blake Peak in the winter
Blake is a challenging peak in the winter, and best approached via the AMR. Approaching via Elk Lake is not recommended in the winter, unless you are an experienced hiker. In the winter, plan for an extra 3.5 miles round trip due to the gate at Clear Pond being closed, which accesses Elk Lake. Be prepared with microspikes, crampons, and snowshoes.
How to get there
Elk Lake Trailhead: Leave Lake Placid following Rte 73 to Interstate 87. Get off at exit 29 and follow the Blue Ridge Road toward Newcomb. Look for Elk Lake Road on the right in about 4-5 miles; follow it to its end.
